Well Pump Repair in High Springs, FL — 3rd-Generation Family Service for Spring Country
FL Water Well Contractor License #5016 · FGWA · NGWA · NCFWA Member · Google 5.0 Rated · Wisetack Financing
High Springs sits in the heart of North Florida's spring country, where the Floridan Aquifer rises to the surface along the Santa Fe River and the springs that gave the town its name. That's a beautiful thing to live near, and it means the water under your property is closer and more connected than almost anywhere else. Out past the city lines, the homes here run on private wells drawn from that same aquifer, and when the water stops, there's no utility to call. That's the call we take.
Most High Springs customers find us the same way: "I woke up this morning and have no water." We answer the phone, walk through the diagnostic with you on the call, and schedule the visit. There's no service call fee and no diagnostic fee on routine residential work, and we put the warranty in writing on the invoice, parts, and labor, before you sign anything. Pressure systems and most residential submersibles carry a 5-year parts-and-labor warranty.
Perry-Pump Repair Service is a family-owned well pump shop based in Gainesville, about 25 minutes from High Springs, in the same county. Owner-operator Eric Perry is a 3rd-generation water well specialist; the Perry family has worked North Florida wells for more than 50 years. Whether it's a no-water emergency, a pressure tank short-cycling, a sulfur or tannin problem, or a pre-purchase inspection, one call to (352) 320-2412 reaches Eric or the office directly.
FL LICENSE #5016
Fully state-licensed Water Well Contractor — public FDEP registry.
FREE SERVICE CALL. $0 DIAGNOSTIC.
On routine residential work. Pricing built on the invoice, not the doorknock.
3RD-GENERATION FAMILY TRADE
50+ years of Perry family well work; Eric is owner-operator
GOOGLE 5.0 RATED
Verified Google reviews from real North Florida customers.
5-YEAR PARTS + LABOR WARRANTY
Pressure Package + most residential submersibles. Always in writing.
Spring Country Covered
High Springs sits right on top of the Floridan Aquifer we work every day.
High Springs lives on top of the aquifer — and that shapes every well here
High Springs grew up as a railroad and phosphate town in the 1880s, but what defines it today is water. The town is the gateway to the Santa Fe River, and the freshwater springs that draw divers and paddlers from around the world: the same Floridan Aquifer that feeds those springs feeds the private wells out here. Here the Floridan Aquifer is close to the surface, so the connection between the surface and your drinking water is short and direct — which is exactly why a sound wellhead seal matters.
That makes High Springs both a wonderful place to have a well and a place where doing the work right matters more than usual. A bad wellhead seal here doesn't just risk your water: it risks the same aquifer that surfaces at the springs. That's the work Perry-Pump is built for: diagnosing and fixing well systems with a licensed 3rd-generation specialist who understands what's underneath this part of North Florida.
-
First, the aquifer is unusually close to the surface here, and the water table moves with the river and the rain — so wellhead and casing integrity matter, and most seal issues we see trace back to the original installation.
Symptoms and failures we diagnose across High Springs
If something about your water isn't right, it's probably on this list. These are the symptoms and component failures we see most often on High Springs homes and properties. If any of them sound like your situation, the diagnosis on the phone is usually close enough to put a plan in motion before we arrive.
No Water at All
- You turned the tap on this morning, and nothing happened
- Faucets sputter for a few seconds, then run dry
- Sudden complete water loss with no warning
- A tripped breaker that won't reset
- The pump is running audibly, but no water reaches the house or barn
- Power is on, but the pump won't start at all
- Water at one fixture, none at another
- A lightning strike took out the control box
Pressure Problems
- The pump short-cycles — clicking on and off every 30 to 60 seconds
- The pump runs constantly and never shuts off
- Low water pressure throughout the house
- Pressure drops sharply when two or more fixtures run
- Water hammer or banging when a tap shuts off
- The pressure tank feels heavy or waterlogged when tapped
Smell, Staining & Water Quality
- A rotten-egg or sulfur smell from the taps (hydrogen sulfide)
- Orange-brown iron staining on sinks, tubs, fixtures, and laundry
- Chalky scale and hard-water buildup on fixtures and appliances
- A yellow-to-brown tannin tint, especially in wells near the Santa Fe River
- Gritty sediment or sand in the water
- A metallic or off taste you want tested
Pump, Tank & Control Failures
- A failed or waterlogged pressure tank
- A worn or stuck pressure switch
- A burned-out control box or start capacitor
- Insects fouling the pressure-switch contacts
- A submersible, jet, or irrigation pump at the end of its life
- A corroded or unsealed wellhead after a storm or flood
- A corroded or unsealed wellhead that risks both your water and the aquifer
Every well and pump service we offer in High Springs
Well pump repair is what most people search for, but it's one of many things we do for High Springs homes and properties. Whatever your water problem is, it's on this list — click any service to learn more.
Not sure which one fits your problem? Call (352) 320-2412 and describe what's happening. Most of the time we can name the likely culprit on the phone before we ever load the truck.
North Florida water conditions that affect High Springs wells
Every market has its own water personality, and High Springs has the most distinctive one in our whole service area — it sits directly on top of the Floridan Aquifer in deep karst country. Here's what we actually see in the field out here, and why it matters for your pump, your water, and the springs.
-
The water table here moves with the rain and the river, which can change how a well draws over time. A sound wellhead seal keeps surface water out — and when we see a compromised seal, it usually traces back to the original installation, which we repair to a sound, sealed condition.
-
High Springs gets over four feet of rain a year, concentrated in the summer, and low-lying ground near the river and spring runs can flood. A flooded or submerged wellhead is both a contamination risk and an electrical hazard, especially so in this aquifer. Raising and re-sealing a wellhead is one of the more common calls we get here, whatever the season.
-
It sounds minor until you are the one without water. During the rainy season, insects work their way into the pressure switch. Eric has pulled fire ants out from between the contacts, where they had wedged in and held them apart so the pump could never start. Insect bodies conduct electricity poorly, so once one lodges between the contacts, the circuit stays open and the system will not fire up. It's the first place we check on a sudden "everything was fine, then nothing" failure. We seal the electrical conduit with pest-blocking foam wherever we can, though nothing is ever completely foolproof.
-
High Springs wells draw from the same aquifer that surfaces at the springs along the Santa Fe River, and the aquifer sits close to the surface here. That's why wellhead and casing integrity matter more in High Springs than almost anywhere: a compromised sanitary seal is a direct path for contamination into your water, and the same water that feeds the springs. We inspect the seal and casing on every call, not just the pump.
-
If your High Springs water smells like rotten eggs, that's hydrogen sulfide gas, one of the single most common well-water complaints in North Florida, confirmed by the Florida Department of Health. It's unpleasant, and worse for your equipment: sulfide accelerates corrosion on pump components, pressure switch contacts, and fittings. We diagnose where it's coming from and design treatment around your actual water, not a cookie-cutter system.
-
This is the High Springs signature. Closer to the Santa Fe River and the spring runs, shallower wells can pull a yellow-to-brown tint from tannins, organic material leaching in from blackwater, and decaying vegetation. It's a cosmetic and taste issue more than a safety one, but it points to surface influence that's worth understanding before you treat it, because treating tannins is different from treating iron or sulfur.
-
Orange-brown stains on sinks, tubs, and laundry are dissolved iron; the chalky scale is calcium hardness, picked up straight from the limestone. Both are widespread around High Springs, and hard, iron-heavy water shortens the life of everything it runs through, from the pump to the water heater. Many homes here pair a pump repair with a treatment conversation.
The technical detail that sets our High Springs well work apart
We diagnose top-down, not bottom-up
When water stops, the most expensive possible cause is the pump and drop pipe at the bottom of the well, and it's rarely the actual problem. We start at the surface: power, breaker, pressure switch, control box, capacitor, then the tank, and only then the pump itself. Around High Springs, where sulfide corrosion and insects foul switch contacts, the answer is often a part you can hold in your hand. Diagnosing in that order means you don't pay to pull a healthy pump.
Sizing a pump to the well and the demand
Horsepower is the lazy way to spec a pump. We size to the well's depth, the static and pumping water levels, the recovery rate, and the real demand, house, irrigation, and any livestock together. An oversized pump in a karst well can over-draw and pull air or sediment; an undersized one runs hot and dies young. Getting the curve right is why a correctly specified system lasts in Alachua County.
Pressure tank drawdown and air charge
Short-cycling is the silent pump-killer. A pressure tank works on an air charge above a bladder; when that charge is wrong, or the bladder fails, the pump cycles every few seconds and burns out the motor. We set the air precharge to match the switch's cut-in pressure and verify drawdown, so the pump starts and stops the right number of times, not dozens of times an hour.
Water treatment in the right sequence
Iron, sulfur, hardness, and tannins each need a different fix, and the order matters; treat them out of sequence, and you'll foul the next stage. That's why we test your water first, free with any treatment quote, and design the sequence around your actual chemistry instead of dropping in a generic softener that can't touch sulfide. High Springs water varies property to property; the system should too.
Electrical, grounding, and lightning protection
We look at the wiring, grounding, and box condition, and we seal conduit and switch openings with pest-blocking foam to keep insects out of the contacts. Lightning can damage a control box during a summer storm, so we also check the electrical side after a nearby strike
Constant-pressure systems, and when they're worth it
For homes and irrigation that need steady pressure no matter how many fixtures or zones are open, a variable-speed constant-pressure drive, such as a Franklin SubDrive or a Grundfos drive, ramps the motor to hold pressure flat. It's not the answer for every well: a Cycle Stop Valve is a simpler fix for small fluctuations on the right system. We recommend, based on your equipment and demand, not a one-size-fits-all upsell.
Wellhead seal and casing integrity
A compromised wellhead seal is a direct line for surface contamination into your water and the aquifer, so we check the sanitary cap-and-seal and casing on every call — most seal problems trace back to the original installation.
Our Reviews
The High Springs calls we get most
These are representative of the work we do across High Springs and the spring-country properties around it: the patterns repeat, even though every well is a little different.
1
"No water this morning" on a spring-country property
A well on a property near the river loses water overnight. Nine times out of ten, on a sudden total loss, we start at the pressure switch and control box before anyone touches the pump down the well: it's the cheapest thing to rule out and, around here, often the actual culprit thanks to sulfide-corroded contacts or an insect in the switch. We diagnose top-down, so you're not paying to pull a healthy pump.
2
A tannin or sulfur complaint near the river
A homeowner near the Santa Fe River calls about water that's tinted, smells like sulfur, or both. This is classic High Springs water, and the fix isn't a new pump: it's treatment matched to the actual chemistry. We test the water for free with the quote and design the sequence so the tannin stage and the sulfur stage don't foul each other.
3
Pre-purchase well inspection before closing
A buyer is closing on a High Springs property with a private well and needs to know what they're inheriting. We inspect the pump, pressure system, structural wellhead, and casing, which matters even more in this aquifer, and run an in-house field-kit water-quality check for iron, hardness, pH, nitrate, and sulfide. (Bacteriological lab testing is arranged separately by the buyer: we don't handle coliform/E. coli sampling.) Pre-purchase inspections are a flat $200, which includes the written report for closing.
Why homeowners choose Perry-Pump
Fully licensed and insured. Florida Water Well Contractor License #5016.
Experienced well repair specialists. Third generation, 50+ years working North Florida wells.
Quality workmanship and straightforward customer service.
Free service call and $0 diagnostic on routine residential work.
5-year parts and labor warranty on the Pressure Package and most residential submersibles, in writing on the invoice.
Why High Springs homeowners call Perry-Pump
A licensed, 3rd-generation specialist, not a handyman with a truck
Perry-Pump holds a Florida Water Well Contractor License #5016, listed in the FDEP public registry, and belongs to the Florida, National, and North Central Florida groundwater associations. Owner-operator Eric Perry grew up on North Florida well sites and has run the business since college. When you call, you reach someone who has seen Alachua County water at its worst.
The warranty is in writing: parts and labor
Every install gets the warranty written on the invoice before you sign. Pressure systems and most residential submersibles carry a 5-year parts-and-labor warranty; jet pumps and commercial work carry one year. If a job warrants a shorter term because of the system style, we tell you that upfront and put it in writing, too.
Honest diagnosis, fair pricing
No service call fee and no diagnostic fee on routine residential work. We diagnose top-down, so you don't pay to pull a healthy pump for a problem that lives at the pressure switch. Pricing is built on the invoice, not guessed at the doorknock, and Wisetack financing is available if a full replacement isn't in the budget this month.
Honest advice before you spend money on a High Springs well
If your High Springs water just stopped and the pump is silent, don't assume the worst. The most expensive fix, pulling and replacing a submersible and its drop pipe, is also one of the least common reasons for a sudden failure. Far more often, it's the pressure switch, the control box, a capacitor, or a waterlogged tank, and those are a fraction of the cost. A shop that quotes you a full pump replacement over the phone, sight unseen, is guessing in the direction of the biggest invoice.
And here, more than most places, pay attention to your wellhead seal even when nothing's broken. In this aquifer, a cracked or unsealed cap is a real water-safety issue, not a cosmetic one. If your complaint is smell, stain, or a tannin tint rather than pressure, the answer isn't a new pump at all; it's treatment matched to your water. We include a free water test with every treatment quote and design around what's actually in your well, because the chemistry varies from one High Springs property to the next. There's no one-size-fits-all system, and we won't sell you one.
What happens when you call Perry-Pump
There's no call center and no runaround. Here's the whole process, start to finish.
You call (352) 320-2412
You reach Eric or the office directly during business hours, not a call center. We listen to the symptoms.
We confirm the cause and quote it
We diagnose top-down on-site, explain the real problem plainly, and quote the repair before any work starts. Free service call, $0 diagnostic on routine residential work.
We diagnose on the phone
We walk through what's happening, pressure, sound, breakers, smell, and usually narrow the likely cause before we load the truck.
We schedule the visit
We set a time and arrive with the truck stocked to fix common High Springs-area failures on the first trip.
We repair it and warranty it in writing
We complete the repair and write the parts-and-labor warranty on the invoice before you sign.
Serving High Springs from our Gainesville shop
Perry-Pump Repair Service is based at 747 SW 2nd Ave, Gainesville, FL 32601 — about 25 minutes south of High Springs in the same county. High Springs and the spring-country properties around it are a core part of our home service area.
Business hours
Monday–Friday, 8:00 AM – 5:00 PM. Weekends, late evenings, and holidays are handled as overflow and emergency only — not scheduled service.
After-hours and emergencies
No-water emergencies happen. If you call after hours, here's the honest version of what to expect: we will return the call at our earliest availability. Eric answers when he's awake and not with family, and in most cases, that means getting you on the schedule for the next available day rather than a middle-of-the-night dispatch. We'd rather tell you that plainly than promise something we can't deliver every time.
High Springs well pump FAQs
-
It does. The aquifer is shallow, and the karst is intense here, so your wellhead seal and casing matter more than almost anywhere. A bad seal lets surface water straight into your drinking water and the aquifer. We check the seal and casing on every call, not just the pump. Call (352) 320-2412, and we'll take a look.
-
Not usually, near the Santa Fe River, that tint is often tannins, organic material from surface water, which is treated differently than iron or sulfur. We test your water for free with any treatment quote and design the sequence so each stage actually works instead of fouling the next.
-
Probably not. On a sudden total loss of water, the cause is more often the pressure switch, control box, capacitor, or a waterlogged tank than the pump itself, and those are far cheaper. We diagnose top-down, so you never pay to pull a healthy pump. Be cautious of anyone quoting a full replacement over the phone without seeing the system.
-
No service call fee and no diagnostic fee on routine residential work. We build the price on the invoice after we've seen the actual problem, not at the doorknock.
-
Yes. Our pre-purchase inspection covers the pump, pressure system, structural wellhead, and casing, which matters even more in this aquifer, and an in-house field-kit water-quality check for iron, hardness, pH, nitrate, and sulfide. Bacteriological (coliform/E. coli) lab testing is arranged separately by the buyer. Pre-purchase inspections are a flat $200, which includes the written report for closing.
-
Parts and labor, in writing on every invoice. Pressure systems and most residential submersibles carry a 5-year parts-and-labor warranty; jet pumps and commercial pumps carry one year. If a job warrants a shorter term, we explain why upfront and put it in writing.
No water in High Springs? Call Perry-Pump.
Whether it's a no-water emergency, a short-cycling pressure tank, a sulfur or tannin problem, a wellhead seal you're worried about, or a pre-purchase inspection before closing, one call reaches Eric or the office directly.